|
arsir
上校級會員
Hong Kong
Posts 3303 |
 Posted - 24.12.2006 : 12:02:10
|
i will be there 4:30-6:30~
quote:請問有無人可以幫我換tip呀???
"Potting stabilty and accuracy can be achieved through ultra-light potting power." 
Originally posted by JK47
|
呢個係簽名檔
啱咪一齊玩囉, 唔啱既咪唔一齊玩囉, 就係咁簡單. |
 |
|
|
jjhair2004
少校級會員
Germany
Posts 635 |
Posted - 24.12.2006 : 13:17:35
|
quote:請問有無人可以幫我換tip呀???
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
最初發表人 JK47
|
我幫你換丫,但你要8:00後在旺角會等我喎
〝時光一去永不回,往事只能回味〞 |
|
|
|
No 9
初青會員
Hong Kong
Posts 454 |
Posted - 24.12.2006 : 14:20:13
|
唔知幫唔幫到大家呢~!!!
換tip方法：
1.用cutter小心咁切斷舊tip頭，切口預留少少位到銅咀，避免會弄傷銅咀，然後可用手'met'去殘餘部分，如果仍有舊膠水跡附著在銅咀上，可用cutter好小心咁除去，我習慣用布濕少少酒精或天拿水，輕輕塗抹在舊膠水跡積上，溶化了的舊膠水污跡就好容易除去。
2.係枱面上平放一張沙紙，握住新tip，輕輕係沙紙面上磨平tip底平面，剛剛夠平面就OK啦。
3.如果銅咀平面唔平，先用沙紙(用平面硬物如小木、平銼…壓住)打磨或打磨器打磨到平面，通常打磨一次後，就不用再打磨，除非弄傷o左。
4.在銅咀平面上和新tip平面上，兩面均塗上“Pattex百得”萬能膠(超市有售)，塗上膠水份量不要太多，平均薄薄一平面就夠。OK！跟住你可以去'開個大"啦…^_^，等待膠水乾些少先(呈現有輕微開始乾硬)。
5.把tip頭貼上在銅咀上，用手指緊壓住tip頭一陣(睇你有幾好指力?^_^)，我習慣等多一陣(去飲o炎茶，食個飽…^_^)，然後垂直枝cue在地氈上，用膠鎚鎚打tip頭一陣，千萬唔好發皮四過份用力呀，用陰力得o架啦…否則枝cue彎o左唔好鬧我^_^，或者另有一方法，握住cue尾，cue尾向天cue頭向地，力度好似pot波咁垂直'洞'向在地氈上(可以卸返D撞擊地唔傷cue)，“握緊、向下發些少力再放鬆，或由枝cue自然垂直向下衝…咁'洞'喎”，目的是逼走膠水接囗入面的空氣。
6.㷛埋個電話粥之後，D膠水乾定之後，就可以用cutter切去邊邊多出來部分，預留返些少可以用沙紙打磨到正圓啦。然後用沙紙(水磨沙紙280)粗磨，再用400或600號打磨個頂個靚靚弧形。
Retipping your own cue
1. Cut off old tip.
2. Clean off old glue and remains of old tip. ( scrape with craft knife blade )
3.Make sure top of cue and ferrule is perfectly level. (this can be done with cue top sander for best results.)
4.level back of tip with abrasive paper, on a level surface holding tip between thumb and forefinger.
5.Apply glue to top of cue. ( Ideally 2-part epoxy resin glue, such as Araldite or gel superglue if in a hurry )
6.Gentley place tip on glue and center up. Press down firmley. Wipe off excess glue then gently release pressure. Leave overnight for glue to cure.
7.Turn cue upside down on cutting board and trim off excess tip to size of ferrule.
8.With a flat file shape a rough dome on tip, filing from centre of tip to outside edge.
9.With fine abrasive paper smooth sidewall of tip into ferrule, making sure not to touch the wood of the shaft bellow the ferrule.
10.Finnish off dome with a tip shaper.
-----------------------------------
我係九師弟！我叫阿九！多多指教！ |
|
|
|
92
中校級會員
Posts 1323 |
Posted - 24.12.2006 : 14:31:45
|
|
九師弟: Will you go to MK club this afternoon? |
|
|
|
No 9
初青會員
Hong Kong
Posts 454 |
Posted - 24.12.2006 : 14:38:51
|
|
|
|
92
中校級會員
Posts 1323 |
Posted - 24.12.2006 : 14:43:57
|
|
OK......next time la! |
|
|
|
vic vic
中校級會員
Portugal
Posts 1335 |
Posted - 24.12.2006 : 17:06:54
|
sorry jk！
我手工差攪唔掂呀！
quote:今日VicVic幫我整乜咗!但無時間換呀!!!
所以無Cue用囉!!!!
quote:你粒tip發生咩事啊 ???
quote:我的TIP無咗!!!!
無Cue用呀!!!
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
Originally posted by JK47
|
-----------------------------------
我係九師弟！我叫阿九！多多指教！
Originally posted by No 9
|
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
最初發表人 JK47
|
|
|
|
|
vic vic
中校級會員
Portugal
Posts 1335 |
Posted - 24.12.2006 : 17:09:22
|
我會問總書記攞返我今個月既工支的
quote:yau~如果十二點左右過去得唔得?你起身打比我......vic~幾時做左文書?
最初發表人 ki
|
|
|
|
|
kinlo
初青會員
Posts 129 |
Posted - 25.12.2006 : 00:21:50
|
|
any brother want to play snooker tomorrow? |
|
|
|
ki
少校級會員
Japan
Posts 907 |
Posted - 25.12.2006 : 00:47:54
|
|
kinlo~~又係我.........報名....你幾點?...我要下午.....仲有邊位師兄有興趣,最好就一胆拖十幾腳.......... |
|
|
|
ki
少校級會員
Japan
Posts 907 |
Posted - 25.12.2006 : 00:55:49
|
史生.....幾時同我打番場,順便指點吓.......士登,士登,士登  |
|
|
|
kinlo
初青會員
Posts 129 |
Posted - 25.12.2006 : 00:59:05
|
|
我幾早都ok....6點要走 |
|
|
|
ki
少校級會員
Japan
Posts 907 |
Posted - 25.12.2006 : 01:02:37
|
|
我兩三點左右......明早電聯 la 師亨 |
|
|
|
ki
少校級會員
Japan
Posts 907 |
Posted - 25.12.2006 : 01:08:10
|
|
阿yau...今日唔該晒你帶我出城市......安怡真係犀利 |
|
|
|
kinlo
初青會員
Posts 129 |
Posted - 25.12.2006 : 01:19:33
|
no problem
|
|
|
|
Sandy18
初哥級
Posts 24 |
Posted - 25.12.2006 : 02:09:47
|
Hi
everybody
Merry Christmas!! |
|
|
|
WOODWOOD
上校級會員
Hong Kong
Posts 2021 |
Posted - 25.12.2006 : 02:24:29
|
聖誕快樂∼祝人人打波有進步∼.......
MERRY CHRISTMAS to 水仙會所有兄弟妹∼！！！
=======================
吹水時 q ^..^ p ... 認真時 q \ _ / p ...
發呆時 q - .. - p ... 符碌時 q 0 _ 0;p...
我係「活活」呀∼哈哈哈∼
======================= |
|
|
|
JK47
隊長級會員
Brazil
Posts 5691 |
Posted - 25.12.2006 : 03:31:13
|
Arsir.....我6pm到咗MK club....見你唔倒呀!!!
quote:i will be there 4:30-6:30~
quote:請問有無人可以幫我換tip呀???
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
Originally posted by JK47
|
呢個係簽名檔
啱咪一齊玩囉, 唔啱既咪唔一齊玩囉, 就係咁簡單.
Originally posted by arsir
|
"Potting stabilty and accuracy can be achieved through ultra-light potting power." |
|
|
|
JK47
隊長級會員
Brazil
Posts 5691 |
Posted - 25.12.2006 : 03:35:16
|
Thank you No.9 換tip方法.
史生幫我換咗tip....暫時幾好用呀
Thank you 史生!!
"Potting stabilty and accuracy can be achieved through ultra-light potting power." |
|
|
|
JK47
隊長級會員
Brazil
Posts 5691 |
Posted - 25.12.2006 : 03:38:49
|
其實唔關你事.....我要趕住走...又無比足夠時間你!!!
攪唔掂係正常!!!
Thank you Vic Vic 幫手!!!
quote:sorry jk！
我手工差攪唔掂呀！
quote:今日VicVic幫我整乜咗!但無時間換呀!!!
所以無Cue用囉!!!!
quote:你粒tip發生咩事啊 ???
quote:我的TIP無咗!!!!
無Cue用呀!!!
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
Originally posted by JK47
|
-----------------------------------
我係九師弟！我叫阿九！多多指教！
Originally posted by No 9
|
"Potting stabilty and accuracy can be achieved through ultra-light potting power."
最初發表人 JK47
|
Originally posted by vic vic
|
"Potting stabilty and accuracy can be achieved through ultra-light potting power." |
|
|
‘九龍灣開心桌球之友兼水仙會吹水post
Topic Locked
